The cold of winter and the rains of spring both take their toll on your roof. It’s a good idea to get your roof inspected at least once every few years.
Experts say the most ideal time is during either spring or fall. This allows a professional to assess the problems caused by the previous season and prepare for the upcoming changes in weather.
Regular inspections also allow your contractor to catch small problems before they become big problems. And where roofing is concerned, big problems can become very expensive big problems if not caught before they start leaking.
Roofing pros see their schedules begin to fill up early in the spring, so it’s a good idea to call someone sooner rather than later. Expect to pay around $200 for this service.
What to expect from a roofing inspection
A roof inspection can be done in a single day. Here are elements a reputable roofing professional should always address:
— Overall appearance of the roof, both exterior and interior.
— Going into the attic to look for moisture or mold and check for proper insulation and ventilation.
— Evidence of ceiling cracks and leaks.
— Condition of fascia, gutters and drains, skylights, chimneys and vents.
— Curled, broken or missing shingles.
— Areas where water may collect, like roof valleys.
— Damaged or missing flashing points.
Your region will affect your inspector’s areas of emphasis. Areas with frequent storms need to be inspected for potential blow-off and roof strength. More humid climates call for an emphasis on potential moisture damage.
The inspector should provide you with a written report within seven days that includes both photos and written descriptions of their findings, the overall condition of the roof, and itemized recommendations for potential repairs.
When hiring a roofing inspector, make sure they have experience with your particular type of roof. Different roofing materials can call for very different qualifications. Make sure they hold the proper license, bonding and insurance to work in your area. Insurance is always vital, but it’s particularly important with professionals who work on jobs where there’s a fall risk.
Don’t be afraid to ask for written proof of licensing and insurance, and to check it yourself. A reputable professional will always welcome such scrutiny of their qualifications.
Performing a self-inspection
You can also perform a self-inspection in between professional inspections to gauge the condition of your roof. If you do this, invest in high-quality fall protection equipment so you can stay safe while on the roof.
Look for these elements while self-inspecting:
— Integrity of shingles and flashing around pipes, chimneys and vents. Pay attention to soft spots and missing, broken or worn shingles.
— The quality of the gutter system. It should be attached properly and free of debris.
— Your home’s interior. Closely inspect top-floor walls and ceilings for leaks or stains. Check the attic for wet spots or rotting wood.
When to hire an expert for home projects
Pro or no
The challenge of hanging wallpaper is keeping it straight and matching up the patterns correctly.
Sometimes bubbling can occur, and that strip of paper will need to be removed and replaced. This can result in running out of wallpaper and needing to order more.
Don’t want to risk it? Hire a professional.
Electrical repairs and installations are at best expensive. Taking a little time to research and understand your electrical system can give you the necessary skills to do some electrical projects yourself.
When installing a light fixture, low-voltage projects can be safely performed by a homeowner, as these are less likely to cause structural or bodily harm.
Stick with a professional for anything over 50 volts.
A running toilet can be comfortably fixed by a DIY-er with a toilet rebuild kit from any hardware store. These kits typically contain straightforward and easy-to-follow instructions.
On the other hand, one-piece or specialty toilets can be tricky and might need the professional touch.
One DIY fix for a drain pipe may be to simply tighten a slip-nut near the P-trap. If the leak is coming directly from a hole in the drain pipe, you could try a flexible coupling with hose clamps.
Consider calling in a professional if the leak is from a drain pipe inside the wall.
Nearly any homeowner can patch nail holes.
Using a spackle knife, fill in each hole with lightweight putty and scrape the excess off the walls. Wait for the putty to dry, and sand down the spot until it’s smooth. Then, paint the repaired spots with primer.
Larger holes in drywall require more steps to repair and may be best left to the professionals.